586,533 active members*
2,848 visitors online*
Register for free
Login

Thread: RFQ Aluminum Disk

Results 1 to 5 of 5
  1. 03-28-2017, 11:24 PM #1
    SilverS
    SilverS is offline Registered
    Join Date
    Sep 2015
    Posts
    2

    RFQ Aluminum Disk

    Extruded aluminum is ok, thickness isn't critical
    Aluminum Type 6063 is prefered but 6061 is acceptable.

    Qty is 32 of these disks
    Thickness 1/4 inch
    Diameter 3 inches
    4 holes 1/4 inch each drilled
    chamfered or radiused outside edge of disk
    Shipped to Michigan


    .iges file is on my dropbox
    https://www.dropbox.com/s/ig7jgkxhf7...Disk.iges?dl=0


    Picture is below
    Attached Thumbnails Attached Thumbnails Disk Mount.jpg  
    Reply With Quote Reply With Quote
  2. 03-30-2017, 03:05 AM #2
    ten4machining
    ten4machining is offline Registered
    Join Date
    Jan 2017
    Posts
    13

    Re: RFQ Aluminum Disk

    we would like to send you a quote. could you please provide your email? or you can email us at [email protected]
    Reply With Quote Reply With Quote
  3. 03-30-2017, 04:07 AM #3
    devolution_mach
    devolution_mach is offline Registered
    Join Date
    Oct 2016
    Posts
    8
    If you could send me an email [email protected] I would be more than happy to reply with a quote.

    Thank you
    Reply With Quote Reply With Quote
  4. 03-31-2017, 10:56 PM #4
    mittler
    mittler is offline Registered
    Join Date
    May 2015
    Posts
    23

    Re: RFQ Aluminum Disk

    Pm Sent.

    Thanks, Matt Mittler
    Mittler Machine Works

    [email protected]
    Reply With Quote Reply With Quote
  5. 04-01-2017, 01:23 AM #5
    SilverS
    SilverS is offline Registered
    Join Date
    Sep 2015
    Posts
    2

    Re: RFQ Aluminum Disk

    Thanks for all the quotes.
    I have awarded the job to a shop.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Aluminum Disk need 25
    By termar in forum North America RFQ's
    Replies: 6
    Last Post: 04-02-2016, 10:39 AM
  2. U Disk Problem
    By alfonsordz19 in forum Tormach Personal CNC Mill
    Replies: 2
    Last Post: 09-24-2015, 01:22 AM
  3. mastercam disk
    By castleman in forum Mastercam
    Replies: 1
    Last Post: 08-13-2014, 04:37 PM
  4. there is no disk in the drive. Please insert a disk into drive\device\harddisk\dr2
    By PRINT_FX in forum Mastercam
    Replies: 7
    Last Post: 01-11-2012, 05:19 AM
  5. boot disk
    By spuzzbutt in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 3
    Last Post: 12-01-2004, 02:39 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules