Hi there,
I'm a CNC Noob. Just built my first CNC Router and I'm running Mach3.
I've set up my A axis to be the slave of the Y axis as I have a dual motor drive. I've used the Soft Limits screen to set the A axis in reverse, and set the Home slave axis with master option.
When jogging with up/down keys, both motors run with one another in the correct direction. However, when I run a basic G-Code program (The Open Source Hardware logo converted with DXF 2 GCODE software) although on the first linear movement command it seems to run fine (though I cannot be sure it does, just an observation), when I see G2 arc commands being executed, the axes do not move together, and there is a clicking from my motors as they fail to move.
Does anybody know what the cause of this issue is?