586,114 active members*
3,337 visitors online*
Register for free
Login

Thread: Y axis have MANY resonance

Results 1 to 2 of 2
  1. 04-06-2017, 05:44 PM #1
    MarcoGaspar
    MarcoGaspar is offline Registered
    Join Date
    Jan 2007
    Posts
    8

    Y axis have MANY resonance

    Hello,

    i build one machine with:
    ballscrew 1605x1000 (Y)
    ballscrew 1605x650 (X)
    ballscrew 1605x350 (Z)

    Nema motor 34 1600oz.

    All axis moves ok but the Y axis have MANY resonance.

    What should i change to eliminate ou reduce the noise?

    ballscrew 1610 / 2005 / 2010 ?
    nema motor 23 ?
    Reply With Quote Reply With Quote
  2. 04-06-2017, 05:59 PM #2
    ger21
    ger21 is offline Community Moderator
    Join Date
    Mar 2003
    Posts
    35538

    Re: Y axis have MANY resonance

    It's probably a combination of motors and drives, Smaller motors, and better drives would probably work a lot better.
    Those 1600oz motors are almost always a bad choice.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Jogging the axis sounds different... Self resonance at certain speeds.
    By cordvision in forum Tormach PathPilot™
    Replies: 2
    Last Post: 05-03-2015, 02:26 AM
  2. Resonance or what?
    By BTremain in forum Stepper Motors / Drives
    Replies: 8
    Last Post: 01-06-2015, 07:12 AM
  3. Is this too much resonance?
    By manofmanyhats in forum DIY CNC Router Table Machines
    Replies: 6
    Last Post: 09-05-2013, 11:48 AM
  4. Resonance Damper
    By yngndrw in forum DIY CNC Router Table Machines
    Replies: 8
    Last Post: 04-25-2010, 08:19 PM
  5. Resonance
    By Jonathon in forum DIY CNC Router Table Machines
    Replies: 23
    Last Post: 03-28-2005, 04:16 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules