Hi guys
I had an alarm EX0357 Turret index time over
I tried zero return by Parameter D149.1 but it turns 1 station only from 1 to 2 , and I get EX0378 Turret counter B abnormal and Ex0377 Turret counter A abnormal.
Can any one help me with this problem.
I need to understand the sequence of tool change .
turret is controlled with hydraulic motor not ( servomotor and encoder )
I have 4 proximities
SQ 14 clamp fin signal
SQ8 Counter A
SQ9 counter B
SQ10 Counter Z
Regards
Walid