Hello,
I bouth a Router from china (Guangdaly) an the manufacturer did not give me enought informations to make the machine works.
I use to work on MastercamX2 and Type3. the problem is I can not make the machine work with G codes, it shuts down my PC.
On type3 software:
I draw the piece I would like to work
I choose the tool to do it
the soft asks me to choose a machine out of 100 models. the manufacturer did not tell me or send me a documentation to tell me wich one to choose.
I generate a G code with a machine picked randomly and put my machine specifications (x,y,z,spindle...).
I bring the G file to be read by a manufacturer soft called "NcStudio" that commands the machin.
When I press execute the spindle begin to turn and than read one line and shutdown the PC!!!
Here are the specifications of the machine:
table size: x:1800mm y:3000mm
z: 120mm
Spindle rpm: 6000 to 30000 rpm
P: 380V