Re: Help with software types please
You are confusing file types. .rld is the file type RDWorks saves when saving a file to your hard drive. .rd is the type of file RDWorks creates and then sends to the machine itself. The laser machine controller can only read .rd files. If you send the file via USB cable from your PC, you don't really see this process. If you tell RDWorks to save to a Udisk (USB stick) it will send and save the file to the USB stick. You then plug that into the machine and let the machine read it. If you have .rd files on a stick that you want to save to a PC, you have to download that from the stick within RDWorks to RDWorks and then save that to an .rld file from within RDWorks.
"80 Watt” 700mm x 500mm Ke Hui 7050 Laser (Similar to the Red Sail)