586,106 active members*
2,918 visitors online*
Register for free
Login
Results 1 to 5 of 5
  1. #1
    Join Date
    Feb 2017
    Posts
    6

    Fanuc cnc series oi-md

    Hello guys, i need to find parameters for SBK and FEED HOLD buttons and i don't find anywhere about them. I search in parameters manual but nothing.

    Please help me.

  2. #2
    Join Date
    May 2008
    Posts
    107

    Re: Fanuc cnc series oi-md

    Hello Butechi.
    You can see the activity of SBK and Feed Hold button by selecting the SYSTEM -> PMC-> PMCDGN-> STATUS to find down their address, then use it's address to find in the ladder.

  3. #3
    Join Date
    Feb 2017
    Posts
    6

    Re: Fanuc cnc series oi-md

    Thanks for reply.
    Can the button FEED HOLD be activeted from parameters or i need to make modification in ladder?

  4. #4
    Join Date
    May 2008
    Posts
    107

    Re: Fanuc cnc series oi-md

    Quote Originally Posted by Buterchi View Post
    Thanks for reply.
    Can the button FEED HOLD be activeted from parameters or i need to make modification in ladder?
    Dear Buterchi.
    Usualy the FEED HOLD button activated in ladder and named as *SP( G008.5), the LED is *SPL(F000.4). You can see the status of these signal by selecting PMC-> PMCDNG-> STATUS-> key in G08-> Enter and see on sreen( remember that Fanuc named the address as 7-6-5-4-3-2-1-0, that's mean the righ most work is .0), or you can tracking it by entered it's address in ladder monitor( usualy it's allways used OC contact, what's that meaning of * signal).

  5. #5
    Join Date
    Feb 2017
    Posts
    6

    Re: Fanuc cnc series oi-md

    Hello guys, I solved the problem with FEED HOLD, so when i press it the spindle stops from rotation.The solution was a internal relay that needed to be activated.

Similar Threads

  1. Replies: 5
    Last Post: 04-20-2019, 02:31 PM
  2. Replies: 4
    Last Post: 02-21-2019, 08:24 PM
  3. Replies: 28
    Last Post: 05-21-2015, 12:35 AM
  4. Fanuc series 21i-mb
    By schmitty9 in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 4
    Last Post: 01-18-2012, 08:40 PM
  5. Fanuc O-T Series B
    By yarpo in forum Fanuc
    Replies: 1
    Last Post: 09-24-2008, 12:13 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •