I recently purchased a Chinese Laser, and the controller seams so glitchey, seams to work good then run it again and the laser goes a little haywire.
It currently has a Leetro 6585, LaserCut 6.1
Thinking of replacing with either Anywells AWC798C or RuiDa RDC6442G.
Results 1 to 2 of 2
Threaded View
-
03-06-2017, 08:55 PM #1
Registered
- Join Date
- Mar 2016
- Posts
- 2
What is better? Leetro 6585, Anywells AWC798C, or RuiDa RDC6442G
Reply With QuoteSimilar Threads
-
Ruida RDC6442G LED 14 Blinking and laser will not fire
By s1nth3sys in forum Laser Engraving / Cutting Machine General TopicsReplies: 27Last Post: 06-04-2023, 01:17 PM -
Information about RuiDa RDC6442G
By Labmaster in forum Laser Engraving / Cutting Machine General TopicsReplies: 18Last Post: 10-15-2020, 06:56 PM -
Ruida RDC6442G problem
By sanyyos in forum Laser Engraving / Cutting Machine General TopicsReplies: 18Last Post: 06-24-2017, 08:01 AM -
Which controller to go for: Leetro 6585, Ruida, AWC708C lite?
By mrveenie in forum Laser Engraving / Cutting Machine General TopicsReplies: 2Last Post: 05-18-2015, 10:45 AM
Tags for this Thread
Posting Permissions
