Hi all,
Could some of you guys give me a little advise. What size type and size cutter are you using to cut MOP. How deep of cut and feed rates. Also, depth and feedrate for woods such as ebony and rosewood. Thanks in advance guys.
Joel
Hi all,
Could some of you guys give me a little advise. What size type and size cutter are you using to cut MOP. How deep of cut and feed rates. Also, depth and feedrate for woods such as ebony and rosewood. Thanks in advance guys.
Joel
This might help.
http://www.precisebits.com/products/...btnSearch.y=12
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)