[EliseoMonteverd]

Hello,

When I am programing a Drilling cicle in my Mazatrol M32 appears the alarm pictured exactly at the moment when I put the spindle speed in automatic.
I think is very strange ....any thoughts?

Thank you. In advance.

Enviado desde mi GT-I9500 mediante Tapatalk

[nicks]

Hello,

When I am programing a Drilling cicle in my Mazatrol M32 appears the alarm pictured exactly at the moment when I put the spindle speed in automatic.
I think is very strange ....any thoughts?

Thank you. In advance.

Enviado desde mi GT-I9500 mediante Tapatalk

Have you try put the C-SP & Feed value in manually sometime my machine have mixed values don't know which one put in automatically ??

[EliseoMonteverd]

Yes, putting the values of cs-p & feed manually, there is no problem at all. But doing that automatically the cnc freezes up, and it is necessary to reinitialize the machine completely.

Enviado desde mi GT-I9500 mediante Tapatalk

[nicks]

Sound like you need to clear or check your cs and feeds values in the mazak somethings is conflicting with the parameters. There should be a menu page where for different materials with cs & feeds.

[hemanth007]

Hi Dear

1st solve the battery problem . The CPU is getting down and the memory is getting corrupted .

this is not a programming issue.

[EliseoMonteverd]

Hi Dear

1st solve the battery problem . The CPU is getting down and the memory is getting corrupted .

this is not a programming issue.

Thank you for your answer.

I put a fresh battery, and the problem continues, only with drill, not center drill or other tool.

[EliseoMonteverd]

Sound like you need to clear or check your cs and feeds values in the mazak somethings is conflicting with the parameters. There should be a menu page where for different materials with cs & feeds.

Thank you for your answer.

Can you teel me how to clear or check my cs and feeds values in the Mazak ?

[hemanth007]

Thank you for your answer.

I put a fresh battery, and the problem continues, only with drill, not center drill or other tool.

Are you still getting battery alarm on diagnosis screen?

[EliseoMonteverd]

There is no alarm at all. Machine is alarm clean until press the auto cs and feed button.

Enviado desde mi GT-I9500 mediante Tapatalk

[nicks]

It be in one sub menus connect to the materials menu sorry not where it is on your mazak!!

[EliseoMonteverd]

OK. Thank you.

Enviado desde mi GT-I9500 mediante Tapatalk