[ChrisMc]

I defaulted my machine back to factory settings hoping to fix another issue and now the x and y axis are moving to the bottom left corner instead of top left for home position, the y axis keeps bouncing in the corner. the display on the machine is showing a work area of 1000x1000 instead of 500x300 and i can not find how to change it. Last but not least the controls on the machine are working in reverse. Can anyone help please before i get a bigger hammer for it? Thanks, Chris Mc

[TehPepper]

Hi Chris,

I have attached what I think was the defaults for my 350 with the same controller.

You might want to have a look a these two videos on the subject of restoring your machine.

https://www.youtube.com/watch?v=h9NCqTT3Sh8
https://www.youtube.com/watch?v=Y-tva0CSJao

[ChrisMc]

I will. Thanks.

[ChrisMc]

Videos are a great help thanks but i dont have a program to open the attached file.

[TehPepper]

I assume you can get the RDVSet file out of the zip file ok, is that right?

If you have just been using the Corel plugin, you may not be able to access the Vendor settings. As demonstrated here https://youtu.be/h9NCqTT3Sh8?t=4m52s

You need to install RD Works in you have not done so already.

If you didn't get or can't find the software you can download it from RUIDA here http://en.rd-acs.com/Private/Files/add732140c983267.rar That is a RAR file that will need WinRAR for perhaps 7zip to extract the contents.

[ChrisMc]

OK thanks. I just use the reworks program not Corel, I did get it unzipped tho. I'll try the link you sent. Thanks again.