1982 Hurco KMB-1 CNC Knee Mill Mach3 Conversion.
I am looking to sell my 1982 Hurco KMB-1 CNC Knee Mill Mach3 Conversion.
Kwik-Switch II tooling
TECO 3hp VFD
GE Spindle Motor
AnTek 90v power supply
Viper 200F Servo Amplifiers, including a spare amp
PMDX controller
USB SmoothStepper
US Encoders
6'' Eron Vise, and some tooling.
Driven by a solid-state Windows 8 running Mach 3 and a 17'' Touchscreen.
200ipm rapids, 2750rpm spindle. Beefy 1.25'' ballscrews
Runs on 220v Single Phase. Perfect for your garage.
I run AutoDesk Fusion360 on this machine with no problem.
I converted this machine last year and it has payed for itself a few times over. I am moving and can't take it with me. It weighs 4,000lbs. Physically about the size of a Manual Bridgeport.
I have a gantry crane to load it at my shop.
List Date: 2/8/2017
For more info, click here to view the original listing: 1982 Hurco KMB-1 CNC Knee Mill Mach3 Conversion.
--------------------------------------
On Sale For: $4,000.00
--------------------------------------