what do you mean by interference ??
could you explain more !
ANYWAY i did some test and the problem gone
i connect the body of cnc and all stepper motors to the pc ground DIRECTLY ...the problem solved
but the ground of my driver tb5065 are isolated of pc by opt.
should i connect the gnd of pc to the driver directly ?
Results 1 to 14 of 14
Hybrid View
-
03-27-2017, 11:18 AM #1
Registered
- Join Date
- Mar 2017
- Posts
- 10
Re: when turn on the vfd spindle , all axis moving hardly
Reply With QuoteSimilar Threads
-
Axis GUI: How does one turn spindle in reverse??
By torinwalker in forum LinuxCNC (formerly EMC2)Replies: 3Last Post: 03-22-2011, 05:39 PM -
Is it possible to turn an axis into a spindle
By kningzer in forum FanucReplies: 0Last Post: 02-07-2011, 07:58 PM -
Axis' keep moving after spindle stops.
By rabishop in forum Want To Buy...Need help!Replies: 5Last Post: 01-19-2011, 01:37 AM -
Moving the Feed Axis with the Spindle locked?
By macrob5482 in forum Daewoo/DoosanReplies: 7Last Post: 01-07-2010, 06:29 AM -
Ver 7.0 Eztrak 2 axis. Spindle wont turn
By MrMudd in forum Bridgeport / Hardinge MillsReplies: 3Last Post: 06-13-2006, 07:18 PM
Tags for this Thread
Posting Permissions
