[NCS007]

I'm converting a large format printer into a CNC router. It is set up with two Leadshine ACH750 drives and servo motor for the X and Y, the Z is a smaller driver board. My plan is to connect a smoothstepper ESS and Utilize Mach3 to start. Looking for anyone who has messed with the Leadshine EL5 ACH750 drives. I just ordered the "special cable" for the protuner software and already have the ESS board.
I will post pictures and details of my build as I get further along.

Thanks for any direction.

[allen2080]

Hi, NCS007,

I was familiar with Leadshine Servo Products! Maybe i can help you. But can you tell me more details, Because i still don't know what the problem is?
or you can contact Leadshine directly! http://leadshine.com/LeadshineSales.aspx
Thanks.

[NCS007]

Thanks for the quick response. I received my pro tuner cable yesterday and was able to confirm the servo controllers and motors all work.
My challenge now is setting up my smoothstepper ESS with Mach3, and connecting to the controllers. I'll have to do some research on setting this up correctly.

I'll post some pictures this weekend.

Thanks