I'd like to have a (2) custom lens boards CNC'd from 1/8" aluminum. The X and Y dimensional tolerance is not really important but the .125 thickness needs to be as close as possible.
The board measures approximately 4" x 4 1/8". There is a hole cutout but no other features. The final hole size is still being worked out so I'm not including the CAD file.
I was planning to have it anodized. If that's a service you offer please quote that as well.
I'm in Berkeley, CA. and have the occasional CNC job so a Bay Area machinist could be helpful but not critical.
Thanks everyone.
- Daniel Moore