Does UCCNC support dual homing switch on one axis? This would allow the gantry to be squared each time the machine is homed.
Thanks
Does UCCNC support dual homing switch on one axis? This would allow the gantry to be squared each time the machine is homed.
Thanks
Yes, as long as it uses a master and slave motor.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
^ that is pretty cool.