For Milltronic VM 24 with a Centurion 6 control. Thanks
For Milltronic VM 24 with a Centurion 6 control. Thanks
Try the attached Centurion 5/6/7/7000_SLS.MilPst., it is the only one available on the BC website and is really for BC V26 but may work for you with possibly just a few "tweaks"
Unzip the file and copy and paste into your V24 Mill Post file under BobCAD-CAM Data folder.
Regards
Rob
:rainfro: :rainfro: :rainfro: