Hi guys new here and trying to get some help. So I got a different plasma table then what I had and I want to use sheetcam to make the gcodes since I'm familiar with sheetcam now. Problem is that I can't find the post for the Starfire controller that the baileigh table comes with and I know nothing about creating or editing posts. I found the post but it has to be installed on bobcad. I'll attach a gcode that I was able to get from the cnc controller parts library hopefully someone can help me with this. I've contacted sheetcam but haven't really got anywhere they will just give me a short reply once a day. If anyone could help me I would greatly appreciate it! Thanks