Hello everyone, We have an Anilam 1100m everything boots up just fine, the only problem is that the servos will not reset. I have tried pushing the e-stop pressing servo reset but nothing. Checked power supply and that is working correctly. We have replaced the relay switch and it was working. We could hear the loud click when the servos would boot up. Now we do not hear anything and the display does not change either on the display. Even when moving the x and y axis the display will stay at 0.000 for both, including the z axis.

PS: we do have a toggle switch and have tried other methods to try to get it going.

Any help would be much appreciated, thank you all in advance.

Regards,
Amerimachine