[deadlykitten]

i just received this video : is about achieving better grip with less contact for 5 axis machining, based on parts prestamping

kindly !

https://www.youtube.com/watch?v=CmM9...7Chatter_April

[deadlykitten]

this one is about somekind of an upside down vertical lathe

i guess that such a cnc is ok for small parts that dont require a strong spindle, and also are required to be machined one by one

maybe someone will find this machine usefull ...

https://www.youtube.com/watch?v=2tRi...7Chatter_April

[deadlykitten]

superimposed machining : i guess is good for parts that have a nice stable setup, otherwise the cnc will be stopped twice often, because for corection on left or right side of the turret

also i think that the 2nd spindle will be subject to more inertia, since its movement is not relative to the chasis, thus it is not relative to a fix point, but to the turret, that is also moving

https://www.youtube.com/watch?v=59ZpU6CmKzU

https://www.youtube.com/watch?v=7Hy7dOscJmA

[deadlykitten]

air gauge

https://www.youtube.com/watch?v=yFd-j2m_oGg

[deadlykitten]

https://www.metrology-direct.com/mea...canning/planar


https://www.youtube.com/watch?v=ZPrQdgzvUIQ



https://www.youtube.com/watch?v=V0mK3dz-RbA

[deadlykitten]

https://www.youtube.com/watch?v=iChHGR7BdmM

[deadlykitten]

hello, please, what is the magic trick from 3:40 ? is it a simple operator intevention, thus dragging the part out by hand?

https://www.youtube.com/watch?v=De1-8RwkY4E

[deadlykitten]

hello, please, what is the magic trick from 3:40 ? is it a simple operator intevention, thus dragging the part out by hand?

https://www.youtube.com/watch?v=De1-8RwkY4E

air unloader

http://www.lns-america.com/catalog-E...oader/Blazeair

... pls find attached

[theemudracer]

hello, please, what is the magic trick from 3:40 ? is it a simple operator intevention, thus dragging the part out by hand?

https://www.youtube.com/watch?v=De1-8RwkY4E

It is a vacumn unloader made by LNS.
Blaze Air is model name.

Ps I know because it's my video...lol

[kurmay]

[OKUMA85]

This is European alternative
https://www.coolant-hose.com/variojet-vj14/

[deadlykitten]

take a break / watch a movie : valerian and the city of a thousand planets

---

olaaaaaa everyone this thing will ( almost ) remove ( all* ) the oil layer that is above the coolant

cleaning a coolant tank is decided by a few factors :
... 1) a lot of big chips inside the coolant tank ( chips may fall inside the tank when using a conveyor, or when removing the chips with a shovel, etc )
... 2) small chips ( like dust, etc, microparticles ) inside the tank
... 3) too much lube oil
... 4,5,6,7,8,9, ... etc

so you dont have to worry about the 3rd factor anymore

of course, there are also oil-skimmers, but this product is much better / kindly

*all = 99.99954796349875643 %

https://www.youtube.com/watch?v=i0R1JoR5TUY

[deadlykitten]

COFA Tool Selector | HEULE Precision Tools

https://www.youtube.com/watch?v=CxBG9I_9LX8

https://www.youtube.com/watch?v=LDJ1RGjwbGk

[deadlykitten]

cooffe needs coolant

https://www.youtube.com/watch?v=_TJA5vokRpE