Hi guys,
I called Tormach today and ordered the PathPilot DVD. It was 100 bucks, and they have a part number for non Tormach users - 36035 I believe.
I have a few questions, and I'll probably have a couple more during the switchover. Primarily, I'm curious as to what MESA board is recommended. I have the 4 axis stepper Pulsar and would like to keep some flexibility for future additions (additional axes, tool changer, or changing to servos). Also, I'm using BobCAM for SolidWorks and will need to know what post processor to use.
Anything else to know while switching controllers?
Thanks for your help!
Micah