Originally Posted by
Coolant Slinger
Keen,
Thanks for the video. This is exactly how my Rapid Turn is reacting. Although I was able to remove the sensor mounting plate with the rapid turn mounted on the mill table, it was a tight squeeze. I losenened the motor and propt it up out of the way. I ground the bracket a little at the top of the sensor to make it easier to remove in the futre. Tormach is sending me another sensor. Hope to get it running soon. I noticed some vibration around the 1000 rpm mark. I am thinking it is where the spindle flag is not counterbalanced. Have you tried to counterbalance yours?