[JJKPGZ]

Hi I have a South Bend CNC Lathe 1218 Magnaturn, about 1991 vintage and I'm having trouble loading new programs into the machine on a 3 1/2" floppy.
It worked great for two years now all of a sudden it will not take new programs.
I think the old computer has a funny way of formatting, with a SYS DIR file on the disk. I think mine got contaminated. The machine controll will load programs that are already in the memory so the machine is OK, It must be a bad disk.
Is anyone familiar with the way these old machines work and can anyone send me a new SYS DIR file for my disk. I didn't get any software with the machine.
The service guy at South Bend lathe in Indiana has been out for three weeks.
Thanks

[afn09556]

Hi, Joe

Having the same problem with SB.

Sending you a Private Message.

Thanks, Chip

[bconlin]

Our machine is doing the same thing, what suggestions does anyone have? We can't get any service on it & the IT guy is lost...

[airamp]

HI,

The magnaturn appears to be a 8088 computer, older dos machine.

If it cannot now read the floppy maybe your bios battery has failed and reset the floppy ( and bios) back to factory (computer) specs.

If this is true than the floppy was reset to a 720K??

I would check the bios settings..

AirAmp

[novice5]

I would like a post processor for the Magna turn lathe[email protected]

[M.E.M.S. INC.]

Hello everyone my name is Craig of Midwest Electro-Mech Inc.
I am a small business owner whom supports the old SouthBend Magnaturn 1218 lathe. I do control testing, electronic componet level repair, in-house machine control reconditioning and or repair and phone support. I have system operating software, several versions. Also I do have a limited supply of control boards however I can recondition yours. So whomever needs help I am here.

[nearsprecision]

Hello Craig,
Are you still in business? I was trying to track you down. This thread is quite old but I was interested in knowing if you are still doing any SBL Magnaturn work.

Regards,
George

[streetroded]

I need help with my 1218 megaturn south bend please g mail me at [email protected] or call 856-265-4113 ask for ed