Yaskawa DC Servo Motor

Brand New In Factory Packaging: Yaskawa Minertia Brushed DC Motor with Encoder

Yaskawa Brush Servo Motor Servo performance for a stepper motor price. The following specs were obtained in a lab not from the manufacturer: Kv = 13.4V / KRPM Kt = 18.0 in-oz / Amp Rt = 4.8 Ohms My guess is it is a 48VDC rated motor. If so, then: NL speed = 3600 RPM @ 48VDC Stall torque = 180 in-oz @ 10A Peak power = 120W, 90 in-oz @ 1800 RPM Cont power = 67W, 30 in-oz @ 3000 RPM Cont current = 1.67A Encoder = 900 line quadrature TTL Overall Length: 6" Motor Diameter: 2" plus magnet structure Magnet structure 2.5" x 2.5" x 2.l"L Pulley OD: 0.933" with 15 teeth Shaft OD: 0.375" Shaft Length: 1.4" Encoder Connections via 6pin keyed connector. Motor Connection via (2) 3/16 spade terminals Mounting Bracket face mounted with (4) 8-32 flat head screws on a 1 5/8" bolt circle Running direct drive to a 1/4-20 leadscrew (Sherline) you should be able to run at up to 150 ipm with 236 lbs push at 150 ipm. I have run these motors using both the Gecko Drives 320 and 340 under Ahha Artisan CNC(http://www.geckodrives.com) and they run very nicely. I accept PayPal, US Postal money order, cashiers checks. The following specs were obtained in a lab not from the manufacturer: Kv = 13.4V / KRPM Kt = 18.0 in-oz / Amp Rt = 4.8 Ohms My guess is it is a 48VDC rated motor. If so, then: NL speed = 3600 RPM @ 48VDC Stall torque = 180 in-oz @ 10A Peak power = 120W, 90 in-oz @ 1800 RPM Cont power = 67W, 30 in-oz @ 3000 RPM Cont current = 1.67A Encoder = 900 line quadrature TTL Overall Length: 6" Motor Diameter: 2" plus magnet structure Magnet structure 2.5" x 2.5" x 2.l"L Pulley OD: 0.933" with 15 teeth Shaft OD: 0.375" Shaft Length: 1.4" Encoder Connections via 6pin keyed connector. Motor Connection via (2) 3/16 spade terminals Mounting Bracket face mounted with (4) 8-32 flat head screws on a 1 5/8" bolt circle Running direct drive to a 1/4-20 leadscrew (Sherline) you should be able to run at up to 150 ipm with 236 lbs push at 150 ipm. I have run these motors using both the Gecko Drives 320 and 340



List Date: 12/3/2017

For more info, click here to view the original listing: Yaskawa DC Servo Motor
--------------------------------------
On Sale For: $25.00


--------------------------------------