If your in Southern California 5/23 or 5/24 2017 New Fadal Machines Open House At All American Sales in Brea from 11am to 8pm 3160 Enterprise Street, Unit C
Brea, CA 92821
heres the link to their Website https://www.aasalesandservice.com/
If your in Southern California 5/23 or 5/24 2017 New Fadal Machines Open House At All American Sales in Brea from 11am to 8pm 3160 Enterprise Street, Unit C
Brea, CA 92821
heres the link to their Website https://www.aasalesandservice.com/
Cant seem to find any picture of the new fadals since 2014. No videos...nothing. I know they are out there but nobody is talking. Maybe that is a good thing.
We have had good luck with our Fadals milling mostly soft steel and aluminum up to 5 axis. We are always looking for spare parts If you have a broken down Fadal give a shout.
The New Fadal 8030 32000 lbs
Attachment 363256
Massive Base look how wide almost the width of the 8030 table
Attachment 363258
8030 with geared 50 Taper option
Attachment 363260
New Fadal 4020Box
Attachment 363262
And New Fadal head cover off showing the original HiLo Spindle drive as the originals same parts 10k rpm. And being Ball barred .0002 tenths circle
Attachment 363264
It looks very good...very very good. I wonder how fast that controller is. Any shots of the electrical cabinets?
We have had good luck with our Fadals milling mostly soft steel and aluminum up to 5 axis. We are always looking for spare parts If you have a broken down Fadal give a shout.
Back and Control Very clean and Easy looking straight forward
Cant seem to rotate this pic correctly