Hi
My PSU has exploded and no more juice.

My supplier offers me a HY-T150 which is a 150W Power Supply and insistently claims that it will work and there is no risk to the tube; Which I doubt very strongly for the following reason.
RECI Says this:
The dedicated power DY13 should be equipped.......
The working current: test current is 29mA. Maximum working current is 30mA. The
running current must be kept below 28mA. The life span can reach 10,000 hours if the
current is kept below 26mA. The ammeter indicating current must be connected to the
negative electrode of the laser tube.

While the PSU offered by the supplier provides 38 mA Max Output Current and accepts 1000W Max input power. It is not indicated for RECI 100W if I trust the documentation given on Ebay. Please see specifications here : 150W CO2 Laser Power Supply for Engraving Cutting Machine HY-T150 110V 220V | eBay.

What do you think ?
If I can accept the supplier's proposal what should I do to protect my 100W RECI laser tube?

Thanks