Good Day Guys,
I am currently working with SYNTEC 11MB 5-axis machine from China.
Last week I was running a 'Free/Dry Run' just to make sure program works without any error.
All of a sudden Spindle crashed into work piece and whole machine stopped working.
There were few errors displayed, which are as follows
MLC 3 X axis not back to origin
MLC 19 Z axis not back to origin
MLC 27 A axis not back to origin
Operation 18 axis or spindle port no. setting error.
Whilst I tried to bring the machine to home using both Auto/ Manual mode none of the axis is moving.
Would really appreciate if someone could shed some light on what might be the problem OR any suggestions would be awesome
kind Regards
Bharath