I have been dealing with this issue for some time and keep forgetting to try and fix it.

During back plotting with predator, using BC-23, the program will lock up anytime it sees a G73 or G83 drilling cycle. G81, G82 etc are okay, just on the G83 and G73 it happens. Requires me to bring up Task Manager and end the process and all work is lost. I forget abut it sometimes and write or modify long multi-tool programs and then hit back-plot and loose all of the work.

This issue stated about a year ago out of no where. No changes made to the computer.

So, does anyone know how the fix this issue. I know there is a genius here somewhere!

Thanks in advance----Mike