Hi All,
Just need a little help with a choice of stepper motors.
This is what I have:
A 3 axis stepper motor driver board from Xylotex rated 2.5A/phase @ 35v max.
An unregulated linear power supply 6A @ 28Vdc.
My question is out of the following stepper motors which will give me the greatest usable power? I will be wiring them bipolar parallel for max speed and torque.
Stepper 1..........3.1V.......2.1 A.......1.48 Ohm......1Nm
Stepper 2..........5.04V......1.4 A.......3.6 Ohm.......1.24Nm
Stepper 3..........3.15V......2.1 A.......2 Ohm..........1.24Nm
Stepper 4..............4V.........2 A.......1.13 Ohm......1.85Nm
I will be setting my driver board to 8 micro steps. I can not get the torque curves for these motors.
Sorry about all the dots in the list I did space them out nicely but when I previewed the post it pushed everything together and was unreadable
Thank you for any help offered,
Mike