***I think I posted my original thread into the wrong sub category. Hope this one is more appropriate for my question.
I'm ready to pull the trigger on one of these two machines, but cannot make up my mind. I hope some of you can assist me with this decision by sharing some of your experience and knowledge between these machines.
Little background, I'm a hobby carpenter and will use to machine mostly to make one off parts or .... the more likely option ... make BS parts with no real use.
I'm looking at the below (2) models with options:
$4,699 - Probotix Nebula
$120 - Z-Touch off Puck
$4,819 = Total
$2,595 - CNC Router Parts CRP4848
$1,560 - Plug and Play Nema 23
$229 - Track Kit
$130 - Auto Z Corner
$170 - 80mm Spindle Mount
$4,685 = Total
I'm not including the Spindle cost in either one.
I understand the Probotix also includes a PC, which I think I can put together for about $400 if I were to go with the CNC RP one.
I would greatly appreciate anyone's input. If there is a better option for under $6k, please let me know.