Who's going to be the first JGRO machinist to post a video of their JGRO machine. Seems like only the Joe2006 guys are posting videos. I'm still about 2 weeks away from cutting wood. Who's going to be the first one to step up and post a video?
Who's going to be the first JGRO machinist to post a video of their JGRO machine. Seems like only the Joe2006 guys are posting videos. I'm still about 2 weeks away from cutting wood. Who's going to be the first one to step up and post a video?
hear hear, i second that motion..
I'm just trying to keep this high up in the list to let you all guys out there know we're still interested here
Well, I will have to get busy again. I did post some more photos in my DT's jgro machine thread. If I am not disturbed by my beautiful wife or my other irons in the fire I might be able to get this up and running within a couple of weeks also.
DT
Enjoy the movie.
http://youtube.com/watch?v=vR74JnEB9Rk
All comments will be appreciated.
Dave
Gliderguider,
Nice vid! What was the wing span on that bird? I have been wondering how I could post some vids but they were too big. Now I know, using YouTube is a grate idea…
Rob
Deeds not words...
VoltsAndBolts runs RC for the builder. http://www.voltsandboltsonline.com/ My Forum
Hi Rob,
The wingspan is 100 inches. I'm looking forward to seeing your videos too.
Dave
Dave-
Nice video...I was just curious at the time of the video did you/were you running your 1/2" leasdscrews or were you running stock per plans? Could you quickly list any substantial deviations from plans...i was hoping to go back and read your build, but i wanted the readers digest version.....Thanks.
-Jeff
MM
I did almost everything stock. Except the 1/2 acme lead screws. Really not much different then that. I did use some wood screws rather than dowels in someplaces.
The plans are very complete. JGRO did a great job developing the design.