[iautom]

There is a MIKRON HSM700 machine(HEIDENHAIN ATEK HS PLUS system) in our plant, there happened a fault,after load cnc system,I can't find any information about the error from the internet, Are there any friends can give me advice?

[TRMT]

Hey you have found a solution for your Problem?
I am an Engenieer for this machines.
If you Need help write me with Photos from the Electronic cabinett and Monitor.
Thomas

[AKSL62]

Hey you have found a solution for your Problem?
I am an Engenieer for this machines.
If you Need help write me with Photos from the Electronic cabinett and Monitor.
Thomas

Dear Thomas

how conversant are you with this machine Model?
I got the same Micron HSM 700 with atek control and the problem I'm having it stops half way through booting up.

I like to hear from you.

[TRMT]

Hello,
I Need more Information of your Problem if it is possible send me photos.
My E-Mail is [email protected]

[Hillebrand]

Hello,
MIKRON HSM 700 machine(HEIDENHAIN ATEK HS PLUS systém
Problem: does not report an error - does not turn on the main source. Fault F41 emergency stop. Display reports Zunaechst nahtstelle einschalten
Thank you for your help

[iautom]

Dear sir.
I have solve the fault,
My Email:[email protected],Like to get in touch with you.
Have a nice day!