[gr3g0rs]

one i put my g code generted from fushion 360 when i have a arc mach3 throws up these erors is there a easy fix to it as im a complete newbie to g code

r i j k i know there to do with the arc and g17 but i either want to get rid of the arc in the tool path or is there another way
regards

thought id edit and include this


G1 Z-9.6 F960
X-76.398 Y-30.614 Z-9.678
X-76.392 Y-30.592 Z-9.753
X-76.383 Y-30.556 Z-9.822
X-76.371 Y-30.508 Z-9.883
X-76.356 Y-30.449 Z-9.933
X-76.338 Y-30.382 Z-9.97
X-76.32 Y-30.309 Z-9.992
X-76.3 Y-30.234 Z-10
G17 G3 X-75.987 Y-28.056 P10.212 <<<<this line>>>
G1 Y-27.906
X-76.145 Y-27.113
X-76.239 Y-26.311
X-76.296 Y-25.504
X-76.329 Y-24.697

[mactec54]

one i put my g code generted from fushion 360 when i have a arc mach3 throws up these erors is there a easy fix to it as im a complete newbie to g code

r i j k i know there to do with the arc and g17 but i either want to get rid of the arc in the tool path or is there another way
regards

thought id edit and include this


G1 Z-9.6 F960
X-76.398 Y-30.614 Z-9.678
X-76.392 Y-30.592 Z-9.753
X-76.383 Y-30.556 Z-9.822
X-76.371 Y-30.508 Z-9.883
X-76.356 Y-30.449 Z-9.933
X-76.338 Y-30.382 Z-9.97
X-76.32 Y-30.309 Z-9.992
X-76.3 Y-30.234 Z-10
G17 G3 X-75.987 Y-28.056 P10.212 <<<<this line>>>
G1 Y-27.906
X-76.145 Y-27.113
X-76.239 Y-26.311
X-76.296 Y-25.504
X-76.329 Y-24.697

To fix the I & J in Mach3 it's quite simple, if this is the problem, under Confg. and then General Config you will find the I & J settings

Yes that line is not right, seems you have a post processor that needs some work