586,103 active members*
3,398 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Okuma > MACTurn OSP 100 ATC

Thread: MACTurn OSP 100 ATC

Results 1 to 2 of 2
  1. 07-14-2017, 06:39 AM #1
    Green Button
    Green Button is offline Registered
    Join Date
    Sep 2006
    Posts
    222

    MACTurn OSP 100 ATC

    Hi!

    Okuma wont change tools.
    Start conditions are ok, but when tool change is done nothing happens...
    In atc dgn screen message:"ATC DIAG.NO 60 " will appear.

    I have cleaned all sensors, but i could not find anything.Any suggestion how to proceed?

    EDIT:
    Macturn 350 OSP 100
    Milling spindle ATC

    -GB
    Reply With Quote Reply With Quote
  2. 07-14-2017, 12:14 PM #2
    Green Button
    Green Button is offline Registered
    Join Date
    Sep 2006
    Posts
    222

    Re: MACTurn OSP 100 ATC

    Solved.
    "Flashing sensor" was problem.
    RSTO sensor should be off when there is no tool. In our case it was flashing fast on/off.
    MGTO sensor should be ON when there is no tool. This is very sensitive.


    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Macturn 30 OSP200
    By Green Button in forum Okuma
    Replies: 3
    Last Post: 09-12-2014, 02:17 PM
  2. Macturn 350
    By Green Button in forum Okuma
    Replies: 3
    Last Post: 11-14-2011, 10:44 PM
  3. Macturn 250-W help with G52
    By Mark_W in forum Okuma
    Replies: 2
    Last Post: 03-30-2008, 04:09 AM
  4. macturn
    By jjmachine in forum DNC Problems and Solutions
    Replies: 0
    Last Post: 10-08-2004, 10:59 PM
  5. MacTurn Post
    By goulyd in forum GibbsCAM
    Replies: 4
    Last Post: 12-23-2003, 01:43 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules