I'm looking for someone to modify a post for me willing to pay. I have a post for Fusion 360 I need modified to work with my machine, I have a working post for sheetcam that i need to use to make the fusion post work.
I'm looking for someone to modify a post for me willing to pay. I have a post for Fusion 360 I need modified to work with my machine, I have a working post for sheetcam that i need to use to make the fusion post work.
What do you need done
http://danielscnc.webs.com/
being disabled is not a hindrance it gives you attitude
[SIGPIC][/SIGPIC]
I'm using a sheetcam post which works with my router, and need a fuson 360 post to match. I have uploaded my to posts. My router uses a piston to lower the right spindle as I have 2 of them, than the z is operated with a ball screw as normal.
You will be better off posting in the HSM forum here https://forums.autodesk.com/t5/hsm-p...forum/bd-p/218
Or if you wont to pay for it and have support behind it get hold of this dude https://forums.autodesk.com/t5/user/...user-id/548578
http://danielscnc.webs.com/
being disabled is not a hindrance it gives you attitude
[SIGPIC][/SIGPIC]
Great thanks!