Working on bringing a Torq Cut 22 back to full operation by troubleshooting and repairing the A axis drive card. The card was originally driving the X axis when it had problems and the A drive card was moved to X. That solved the X's problems and confirmed the card was bad.
I just bought the machine, which is in otherwise good operating condition (paint sucks)and while I'm setting it up I thought I would take a look at the board. One of the two capacitors on the board has broken loose from the traces and is definitely a problem. The traces look to be in acceptable shape and before I just check it with a meter and then reinstall, I thought it would probably be best just to replace all the caps on all the drive boards.. 1996 was a long time ago ( for a machine, not me )
Here is a picture I took of the cap. My google fu has failed me and I can't find a same size cap in my searching...
Can anyone suggest a replacement and source? I have attached a picture of the caps to this post...