Hey Everyone I'm in need of desperate help here. I'm very new to CNC lathes I have ran mills my whole career. We recently have purchased a used Okuma Crown with the U10L control I have been able to navigate around the machine relatively easy but when it comes to putting in the program i have had a bit of trouble. I used Fusion 360 to make a simple turn two diameters to get used to the machine I used the Okuma Lathe post and it generated the program after getting the program into the actual machine I have had errors most which have been an easy fix but i have one line that keeps sending an alarm.The alarm is( Alarm 2366 Tool Radius Comp. No spec) the code line that this happens on reads (G90 G18 G3 x2.4992 z-1.5264 k-0.0312).Can anyone help me with this also if anyone has a sample program that they would share with me that runs on the U10L control so I can compare it to what I have to see where I am off. Like I said i am very new to the CNC lathe so any help with this is appreciated .
Thanks