Hi Folks,

Trying to figure out the best methodology for setting up the tool table in PathPilot along with Fusion. Since I'm new to PathPilot I have read snippits about having probes at certain tool numbers along with height sensors at other tool numbers and using table entry 0 for no tool in the machine.

Give me your best ideas and thoughts on the best way to setup the tool table and maybe some of the why. Ultimately I would like to build out the tool table with almost every tool you would likely use in some coherent manner that works for reason I have yet to identify.

My only thought on this to start was to maybe use the first 10 slots in the table for the most goto tools like a 1/4 endmill etc.

Lets hear what you think.

Thanks