I have an acra vmc with an umbrella type atc. The battery went dead and I lost everything. Acra sent me a copy of the parameters and the atc ladders. I was able to get the parameters loaded through the rs232 port no problem. The plc ladders I can't get to go. The file they gave me is a "links" (extension .lkx) file from mitsubishi's plc development software. From what I can gather the language seams to be EIA or some type of BCD. The manual calls for a mistsubishi transfer program called magictrs.exe which I can't find anywhere. I have been using sd-nc in my surfcam for the serial port communication but haven't had any success.

Has anyone had any luck uploading a .lks file or does it need to me converted into a .lad file?

I'm assuming it's the "all3" ladders they sent me.

Any help would be greatly appreciated