Those are not in the manual, but IIRC 417 is not either and that is 'Abnormal Servo Parameters' warning, so they are all to do with servo parameters most likely.
Double check all your parameters.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
ok thanks, i will check
I reset the parameters and rewrite them, the alarms disappeared, the machine is working well.
- - - Updated - - -
thank
Hi Blakester did you solve this problem? Did it turn out to be a missing output to one of the coils like your friend said?
I have the same problem would be keen to know if it was the board or something else..
John