Gerry, thanks for the reply! I haven't tried to implement your screen set yet, didn't know if i needed to do anything special.
But since you saw this, i might as well ask the creator a question. I read that with the stationary plate, it can be whatever thickness and still calculates the correct z height. How does the original machine z zero get set? Is it when i run the zero z using my moveable plate? Otherwise, it seems like the mounted plate would need a measurement entered to correct.
I do not know if you're familiar with cnc router parts new touch plate, and I haven't run your screens yet, but does the corner wizard allow me to choose the measurements for x max/min y max/min to correctly position the bit?
Thanks in advance, I'm new to all of this and really appreciate the help of the community. Hopefully I can give back one day. Or, at the least, my questions will be found for others to learn as well.


Sent from my SM-N920V using Tapatalk