In between me buying the lathe and collecting it some delightful scumbag removed the parameter list. I knew before I bought it that it lost parameters when powered off but was not bothered as it would not be used very often. I have tried downloading a couple of sets of parameters but they are obviously not the right ones. I have contacted Yamazaki UK and although really helpful the machine is so old the engineer that I spoke to had never seen one.
I can use the lathe without the missing parameters but cant reference it. It also reads 4 times the actual movement, but I just allowed for that when I was using it. The Z axis toggle goes in the opposite direction as well.

I have attached photos of machine and screen so if anybody out there can help me I would be grateful.
I am not an engineer by trade but just know the basics.

Stuart