[78-bandit]

I bought a used Haas, and it has the 4th and 5th axis drive, but I don't have a rotatory table on the machine. The work coordinates don't give me the option of setting a 4th or 5th axis offset. I would like to set the offset as a convenient location to save my part rotation information. Is there a way to activate the work coordinate 4th or 5th axis without installing a rotatory table?

Thanks

[Fletch_CNC]

You need to set up setting 30 for 4th axis, and 78 for 5th axis. They should appear in the offsets and positions pages after that.