Hello all, I am having some problems with my 4th axis installation. The rotary does not move!. I have checked the cables and there are no alarms on the controller. All 4th parameters from Doosan and table manufacturer are set. The clamping relay works and responds to M10/M11. I have sent parameter files to Fanuc, and they found no issues, all necessary cards are installed all options regarding 4th axis are open. The machine was prewired for 4th axis. Fanuc say I need to look in the PMC parameters to see if anything is wrong or missing. Any ideas what I should be looking for?
Thanks for any advise!
Best regards
John