Has anyone ever tried to use an Centroid Oak board to control Fadal AMP-0040 amplifiers? Curious as to which pin on the axis drive on the Oak go to which pins on the amp. Any help would be greatly appriciated.
Thanks,
K
Thread: Oak board to AMP-0040
Results 1 to 6 of 6
Threaded View
-
09-19-2017, 03:12 PM #1
Registered
- Join Date
- May 2014
- Posts
- 4
Oak board to AMP-0040
Reply With QuoteSimilar Threads
-
Centroid Oak to AMP-0029/0040
By kwalz in forum FadalReplies: 1Last Post: 08-10-2018, 03:30 PM -
The CRT interface Board A16B-2600-0040/06B on a Fanuc P-System Model H Dead.
By Asmordo in forum FanucReplies: 15Last Post: 02-14-2015, 05:38 PM -
How I fixed an AC driver board, AMP-0040
By little bubba in forum FadalReplies: 6Last Post: 05-28-2012, 02:32 PM -
A16B 1010 0040
By gglynn81 in forum FanucReplies: 2Last Post: 05-18-2008, 04:02 AM
Tags for this Thread
Posting Permissions
