586,315 active members*
3,254 visitors online*
Register for free
Login
IndustryArena Forum > WoodWorking Machines > Commercial CNC Wood Routers > My Multicam is ignoring my max depth

Thread: My Multicam is ignoring my max depth

Results 1 to 3 of 3
  1. 09-25-2017, 11:18 PM #1
    KevinMakesStuff
    KevinMakesStuff is offline Registered
    Join Date
    Sep 2017
    Posts
    1

    My Multicam is ignoring my max depth

    Hello all,

    I'm a brand new member, and have only been running a CNC machine for a little over 2 years now. The company I work for has a Multicam MG Series. While running some acrylic today, the machine spontaneously began cutting well below the max depth set; and not by a few thousandths, but like a quarter inch into the bleeder. I've re-started, and re-homed the machine several times, and re-calibrated, then re-touched surface and max depth, but the problem persists. Any help would be greatly appreciated.
    Reply With Quote Reply With Quote
  2. 10-02-2017, 01:51 AM #2
    micknm
    micknm is offline Registered
    Join Date
    Sep 2017
    Posts
    78

    Re: My Multicam is ignoring my max depth

    Quote Originally Posted by KevinMakesStuff View Post
    Hello all,

    I'm a brand new member, and have only been running a CNC machine for a little over 2 years now. The company I work for has a Multicam MG Series. While running some acrylic today, the machine spontaneously began cutting well below the max depth set; and not by a few thousandths, but like a quarter inch into the bleeder. I've re-started, and re-homed the machine several times, and re-calibrated, then re-touched surface and max depth, but the problem persists. Any help would be greatly appreciated.
    Check your Z axis drive belt. The cogged belt may need replacing.
    Reply With Quote Reply With Quote
  3. 10-02-2017, 03:26 AM #3
    Gundawg
    Gundawg is offline Registered
    Join Date
    Dec 2007
    Posts
    118

    Re: My Multicam is ignoring my max depth

    Make sure the bit is not slipping in the collet.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. mach-3 ignoring my origin. goes to home instead
    By mxpro32 in forum Mach Mill
    Replies: 2
    Last Post: 08-09-2018, 06:28 PM
  2. VF2 ignoring M00
    By dingo0722 in forum Haas Mills
    Replies: 9
    Last Post: 04-11-2012, 01:43 AM
  3. Interface to the iGaging “Snap Depth” Mini Depth Gauge Digital indicator
    By bo.gardmark in forum PCB milling
    Replies: 2
    Last Post: 02-04-2012, 05:27 PM
  4. IGNORING CERTAIN CODES?
    By GRANDPA in forum NCPlot G-Code editor / backplotter
    Replies: 5
    Last Post: 01-30-2008, 01:29 AM
  5. Ignoring Feed Speeds
    By xichanceix in forum DeskCNC Controller Board
    Replies: 1
    Last Post: 12-18-2007, 03:55 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules