I recently bought a CNC from china (M1325x 4X8 cnc). that came with NCStudio. Im using Vetric Pro to design my projects which I have been using on another machine (China made) for 3 years now. On that machine I use Mach3 and have never had an issue. However with NCStudio I seem to be having issues with scaling. After several tries with an actual project with no luck I decided to make a 4X6 inch box and convert that to every NCstudio post processor (as well as a few others) that Vcarve had. What ended up happening was it started carving a 9X17 inch box. I looked at every setting that I could find in both programs but honestly there is a lot that Im not under standing. Does this sound familiar to anyone out there. I sure could use the help