Playing with fusion360 and flashcut software and have a few questions.
I have the flashcut post process all setup. coolant is disabled in the tools, but gcode still shows a few m9 commands. How can I post process without any M9 commands so I don't have to manually edit them all out?

The bigger issue is I keep getting an exceeds machine envelope error. I have changed the starting origin in fusion 360 and moved the part around and the error keeps changing or getting less and less. I have no idea what I'm doing and a little confused. Just by changing the starting point from bottom left to center of the object it gave me an exceeds machine envelope for Z axis even though they are both the same height.

Any thoughts on what I'm going wrong ?

Thanks