Hi,
Bassicly I'm using saved stock (STL file) tht I saved from solid simultion on the first op.
For some reason Z countur roughing still puting toolpaths arround the profile that already have been machinned on op 1.
I'm ending up with cutting fresh air for a long time.
Only way to solve the problem partialy seems to be using boundaries but it's very time consumming.
I've also tried to scale stl so it's little bit smaller than the art - still same issue...
Can anyone help pleaseeee
Results 1 to 3 of 3
-
10-15-2017, 08:49 AM #1
Registered
- Join Date
- Oct 2017
- Posts
- 3
Problem with using stock stl file saved from previous operation
-
10-17-2017, 01:56 PM #2
Member
- Join Date
- Apr 2015
- Posts
- 327
Re: Problem with using stock stl file saved from previous operation
Please upload your Alphacam file.
Originally Posted by andriej1981
Hi,
Bassicly I'm using saved stock (STL file) tht I saved from solid simultion on the first op.
For some reason Z countur roughing still puting toolpaths arround the profile that already have been machinned on op 1.
I'm ending up with cutting fresh air for a long time.
Only way to solve the problem partialy seems to be using boundaries but it's very time consumming.
I've also tried to scale stl so it's little bit smaller than the art - still same issue...
Can anyone help pleaseeeeAlphacam post and VBA macros, Autodesk HSM post.
www.cadcam-softcz.cz
-
10-17-2017, 02:36 PM #3
Registered
- Join Date
- Oct 2017
- Posts
- 3
Re: Problem with using stock stl file saved from previous operation
It's to big for uploading here.
Link to the file on google drive below mate:
https://drive.google.com/file/d/0B81...ew?usp=sharing
Hope it will work.
Thanks
Reply With QuoteSimilar Threads
-
V27 stock almost never shows up when I open saved project.
By photomankc in forum BobCad-CamReplies: 7Last Post: 08-18-2015, 03:43 PM -
How to follow the "resulting stock" of the previous operation
By mikefalkner in forum MastercamReplies: 0Last Post: 03-21-2014, 08:38 AM -
Need some quick help tonight converting a soildworks file to a previous version
By EricMFG in forum SolidworksReplies: 2Last Post: 10-30-2013, 03:47 AM -
Problem with stock (STL) file after i add new MAC coordinate
By Hrki in forum SolidCAM for SolidWorks and SolidCAM for InventorReplies: 1Last Post: 07-03-2013, 12:45 PM -
file saved wrong version
By jrmach in forum BobCad-CamReplies: 3Last Post: 09-05-2012, 11:55 AM
Tags for this Thread
Posting Permissions
