cincinnati milacron and step up transformer
I'm not sure if this would be the right forum for my problem, I have 200 amp single phase coming into the building and have a 40 HP rotary phase converter, from that it goes into a step up transformer 240 to 480 25 KVA . First question is will the rotary phase converter handle the transformer? If it can then I'm having a problem with the phase converter itself. It's powering three other 240 v three phase mills (one at a time) with no issues. The transformer was tested on power for a day before it came here... I hope some one has a simple answer... Thanks
The end result is directly connected to the effort applied